|
Pile Weatherstripping
Pile Weatherseals are closely woven textile yarns
interlaced into a backing. They prevent the infiltration of dust, light, noise
and air through the perimeter on a closed window or door.
Please browse through our selection of Pile Weatherseal
products. The range, built up over many years, is extensive with
options in, colors, sizes, shapes, methods of fitting, etc to fit an equally
large range of applications.
download Finseal and Polybond PDF (1.0MB)
Typical Applications
- Sliding windows and doors
- Shutter guide rails
- Sliding wardrobe doors
- Swing doors
- Door bottoms
Features
- Variety of pile heights, pile colors, fin heights, fin
colors, and backer sizes available
- Can be mounted in a T-slot, with a tape backing, or on a
dual-durometer kerf insert
- Decreases operating force, air infiltration, and water
penetration
- Meets or exceeds AAMA specifications
- U.V. stabilized
- Full range of machines available for automated pile
insertion
- All Schlegel Pile Weatherstripping is specially treated
for optimum water repellancy
- Longevity to last the life-span of the door or
window
Product Summary
POLY-BOND
Move independently to seal against irregular surfaces,
resists abrasion and prevents sticking or binding, due to low friction
design.
FIN-SEAL
Has a central fin acts as an additional, effective
barrier against air infiltration and water penetration. The central fin is also
U.V stabilized and carrier has a fow friction design to prevent sticking or
binding.
Adhesive Backed
Finseal/PolyBond
Select from a pair of pressure-sensitive tape backings.
One is a foamed tape with an aggressive rubber-based adhesive. The other is a
non-foam tape. Both are protected with coated kraft paper until you are ready to
use the weatherstripping and both meet the stringent requirements for tensile
strength, and peel and shear adhesion.
POWER PILEŽ
A new development which give a major advances in speed of
insertion and efficiency of performance.
download PDF brochure
EZ-FIN
Allows for simple installation in PVC extrusions with its
low coefficient of friction with a soft, non-woven fin.
Z-Fin
Allows for increased crush resistance.
Extruder Grade
Utilizes a unique blend of yarn fibers designed for
patented Schlegel In-Line insertion machines for vinyl window or door
extrusions.
Metal Back Pile
Metal Back parts combine POLY-BOND polypropylene weather
seals with aluminum, stainless or galvanized steel carriers for sweeping or
sliding applications.
Use this specialty product for applications from wood
windows to sweeping and sliding applications, wherever you need effective
weather protection.
Skirting
Skirting is made of high quality polypropylene. Use it in
sweeping for sliding applications to fill large gaps.
Door Sweep/Bottom
Mounts on interior or exterior face of door attached by
screws, supplied.
Corner Seal
Is a corner seal for doors with a tombstone cut, with or
without fin.
Textile Corner Seals (Dust
Plugs)
As Corner Seals but without the tombstone
cut.
Angle Seal
Schlegel's Angle Seal weatherstripping is composed of
durable polypropylene with or without an integral center fin for T-slot
applications in sliding windows and doors
V-Pile (picture shown)
The backing has a slight "V" shape to its
backing.
Angle Pile
One of out newer innovations for insect screens. Secures
the screen in the guide against wind pressure.
|
